La balance de Taylor définit l'équilibre de l'eau, c'est à dire la combinaison idéale du TAC du pH et du TAC.
En fonction de 3 echelles alignées côte à côte representant le TAC, TH et pH, il est possible de relever visuellement les valeurs optimales pour la piscine en question.
Quelle que soit la solution de traitement choisie, vous devrez toujours, commencer par vérifier
le pH de l’eau.
La réussite ou l’échec de votre traitement d’eau passe obligatoirement par le réglage du pH.
Ne négligez pas cette étape, elle est essentielle.
Le pH, le potentiel d’hydrogène, est mesuré sur une échelle allant de “0“ à “14“.
• Si le pH de votre eau est à 7, il est neutre.
• S’il est inférieur à 7, il est acide.
• S’il est supérieur à 7, il est basique.
Plus le pH de votre eau sera élevé (basique), moins le chlore sera désinfectant.
Le pH idéal
Le pH idéal se situe entre 7 et 7,2.
Les solutions en cas de mauvais réglage du pH
Le cas échéant, vous devrez utiliser soit du pH+, soit du pH-.
Pour obtenir une variation de 0,1 dans une piscine de 50 m3, vous utiliserez soit 250 g de pH+,
soit 500 g de pH-.
Ex : pour une piscine de 50 m3 : le pH initial est de 7,8, vous souhaitez le redescendre à 7,2 : la
différence étant de 0,6, vous devrez utiliser 3 kg de pH-. Dans le cas contraire, si votre taux de
pH initial est de 6,8 et que, vous souhaitez le ramener à 7,2, la différence étant de 0,4, utilisez
1 kg de pH+.
Mettez le pH directement dans votre panier de skimmer, filtration en fonctionnement. Afin
d’obtenir un résultat plus rapide, vous pourrez aussi, après dilution dans un arrosoir, répandre
cette préparation au périmètre de votre piscine. Cette manipulation ne doit jamais être effectuée
avec un produit chloré.
Dans tous les cas, ne chargez pas massivement votre piscine avec ce type de produit. Toutes les
deux heures environ, refaites une lecture et ne dépassez jamais une dose de 1 kg à la fois.
Le nettoyage s’effectue à l’aide du balai de nettoyage.
Après avoir raccordé le tuyau et le manche sur la tête de balai :
Positionnez la tête de balai au fond du bassin.
Amorcez le tuyau du balai en le remplissant d’eau à l’aide du refoulement du groupe.
En fonction de la puissance de votre pompe, positionnez le skim-vac (double assiette)
de façon à concentrer tout ou partie de l’aspiration sur le trou central, dans lequel sera
raccordée l’autre extrémité du tuyau. Si vous disposez d’un modèle de filtration équipé
de deux poches filtrantes, prenez soin d’obturer un des deux bols avant de brancher le balai.
Passez la tête de balai d’une façon ordonnée (façon “tonte gazon“).
Le choix du traitement sans chlore est fortement conditionné par la nature de votre eau de piscine et sa régularité.
Rapprochez vous de votre concessionnaire afin de faire le meilleur choix.
L'entretien de votre d'eau passe obligatoirement par des analyses réguliers. Au cours d'une saison la composition de votre eau peut varier de façon importante.
Votre concessionnaire Desjoyaux est equipé d'un labo d'analyse professionnel avec lequel il peut analyser votre eau afin de vous donner les bonnes pratiques pour entretenir votre piscine.
Il suffit d'apporter une bouteille d'eau de votre piscine rempli de côté opposé de la filtration à un profondeur de 40cm.
diamètre x diamètre profondeur moyenne x coefficient 0.78 = volume en m3
exemple : votre bassin a un diamètre de 4,6m avec un profondeur entre 1,10m et 1,30m
4.6 x 46.6 x 1.20 x 0.78
19.80 m3
Une règle simple à suivre pour assurer un temps de filtration adéquat est de diviser la température de votre eau par deux.
Si votre est à 24°C vous filtrez 12 heures par jour.
Tâchez à filtrer la journée, quand votre piscine en a besoin. Rien ne sert de filtrer pendant la nuit.
Additionner la profondeur maximum et la profondeur minimum et diviser par 2 pour avoir la profondeur moyenne
Ensuite, multiplier
la largeur X la longeur X la profondeur moyenne
The "all-in-on" filtration solution: stairs, spotlight, bubble jets, and hydrotherapy
The Jet Set filtering stairs
This stair unit is inserted between two structure panels during assembly. Filtration, stairs, spotlight… the unit features a blower, counter-current swimming unit, and spa-style hydrotherapy jets... Chose your own level of comfort
Le plus tôt possible, en début de saison, afin d'éviter la prolifération d'algues.
Différent selon le type d'hivernage :
Total (vous pouvez dans tous les cas de figure faire appel à l'un des concessionnaires) : Retirer la couverture d'hivernage ; la nettoyer, la sécher et la ranger. Remiser les flotteurs. Réinstaller le groupe de filtration ou la pompe. Eliminer les plus grosses impuretés au fond et en surface avec l'épuisette. Remettre à niveau la piscine si nécesssaire. Remettre la filtration en route après avoir contrôlé le bon fonctionnemnt de l'horloge et du disjoncteur différentiel. Passer ensuite l'aspirateur pour nettoyer le fond du bassin. Nettoyer plages et margelles de l'intérieur vers l'extérieur. Contrôler le ph de l'eau, l'ajuster si nécessaire et procéder à une chloration choc (20 gr/m3) fitration en continue pendant 24/48 h .
Hivernage partiel : le fait d'avoir laisser la filtration en marche quelques heures durant la saison hivernale nécessite moins d'efforts pour la remise en route.
Le geste principal sera d'ajuster le temps de filtration en fonction de la température.
même si la piscine ne paraît pas sale, un nettoyage des parois et du fond sera nécessaire.
procéder à un ajustement des taux de ph et chlore.
La maintenance d'une eau de piscine afin qu'elle reste propre et limpide, est réalisée au moyen de l'association d'une double action : la filtration mécanique, et le traitement chimique. Ce dernier permet de corriger l'équilibre de l'eau, et d'y adjoindre un désinfectant.
Un service spécifique au sein du groupe Desjoyaux, composé de téléconseillers, pour répondre à vos questions et vous aider dans vos recherches via le numéro de
Les montants PVC peuvent êtres coupés en alignement du couvercle. Dans ce cas il sera nécessaire de positionner des bouchons de protection à chaque extrémité découpée.
Les montants peuvent êtres également démontés. Dans ce cas 2 tassots caoutchouc devront êtres fixés sur le groupe pour conserver les appuis bas contre la paroi de la piscine.
La couverture à barres est toute saison. L'utilisation d'une bâche
ou d'un filet d'hivernage est également possible toute l'année, mais toutefois moins aisée en période de baignade. (dépose, repose, stockage)
Les bâches d'été type bâches à bulles, flottantes sur l'eau, ne sont pas, au regard de la loi, de type sécuritaire.
Les filets et bâches d'hivernage répondent aux dispositions de sécurité.
Les abris Desjoyaux sont conforme à la norme NF P90-309
Ils résistent à un vent de 100 Km/h et à un poids de neige de 45 Kg au m². Attention il est parfois nécessaire de déneiger lorsque la neige est très mouillée notamment.
Les temps orageux, la fréquentation exceptionnelle du bassin peuvent avoir une forte incidence sur la qualité de l'eau Il faut donc contrôler le taux de chlore et le réajuster.
Il existe plusieurs principes de filtration mécanique :
filtres à sable
filtre à cartouche
filtre à diatomée
filtre à membrane active
La performance d'un filtre est essentiellement conditionnée par sa finesse de filtration.
En traversant une charge de sable, l'eau se décharge de ses impuretés mécaniques.
Cette solution nécessite un ensemble canalisations pièces à sceller et local technique
Réservoir contenant un jeu d'éléments filtrants sous forme de toile ou de bougies (fibres ou résine de synthèse). La filtration est assurée par une fine couche de diatomée(algues fossilisées) recouvrant la surface extérieure de l'élément
Brevet Desjoyaux
Membrane¨retenant les impuretés mécaniques positionnée en amont de la pompe, au sein du groupe de filtration (limite les tuyauteries).
Selon les conditions d'utilisation et d'entretien(tx de calcaire, ph, pollution externe, environnement) la poche filtrante aura une durée de vie de 1 à 3 ans.
Il est conseillé d'en effectuer le nettoyage au jet au moins une fois par semaine et chaque fois que nécessaire. Les finesses différentes 6, 15 et 30 microns permettront une optimisation de l'autonomie en fonction des conditions d'utilisation de la piscine.
Ce nettoyage doit se faire tous les 10 à 15j ou plus souvent lors d'une remise en route, il faut alors retourner la poche et la passer au jet d'eau . Si cela n'est pas suffisant la passer en machine à 30°.
Il est nécessaire de bien nettoyer le panier pré-filtre en le passant au jet d'eau.
Toutes les finesses des poches sont signalées à l'intérieur sur les étiquettes. Par ailleurs les coutures ainsi que les encoches sur le bord supérieur de la poche permettent également le repérage.
poche 6µ : couture blanche + 1 encoche
Poche 15µ : couture verte + 2 encoches
Poche 30µ : couture noire + 3 encoches
La particularité technique des piscines Desjoyaux repose sur la simplicité de ses deux concepts de base et sur l'indépendance de chacun des éléments entre eux
la structure coffrage : le coffrage permanent actif
la filtration sans canalisation
Le pH (potentiel Hydrogène) permet de déterminer si l'eau du bassin est acide ou basique.
On contrôle sa valeur à l'aide d'une trousse d'analyse, si celle ci est > 7 elle est basique et si < 7 elle est acide.
Plus un PH sera équilibré (6.8 < ph < 7.2) plus l'action des produits sera efficace.
Consulter le guide d'entretien de votre piscine
Une filtration sans canalisation réduit les pertes de charges et les risques de fuites. Installé en cavalier sur la paroi de la piscine, le groupe de filtration est complètement indépendant de la structure permettant ainsi d'éventuelles interventions aisées.
L'horloge de votre coffret électrique permet de régler gérer le temps de filtration lorsque cette dernière est pilotée en automatique. Une bonne durée est égale à la moitié de la température d'eau. Ex : Eau à 28° temps de filtration 14h
L'odeur est produite par la transformation du chlore libre (qui se mélange aux déchets organiques ou minéraux) en chlore combiné créant ainsi des chloramines. Ainsi l'odeur ne signifie pas un excès de chlore mais au contraire un besoin d'un nouvel apport de chlore libre.
Une piscine prêt à plonger est une piscine dont l'ensemble de la réalisation est assurée par votre concessionnaire. De l'implantation à la mise en eau toutes les étapes seront réalisées par des équipes de professionnels.
La déclaration préalable de travaux à charge du propriètaire, doit être déposée en mairie afin de permettre le respect du délai d'instruction, Préalablement au début de l'installation ce délai peut être de 1 ou 2 mois selon les dispositions locales d'urbanisme définies en mairie du lieu de l'installation.
La partie haute du volume de la piscine peut-être évacuée à l'aide du tuyau de balai, branché sur le refoulement et raccordé à une évacuation. le moteur de filtartion étant réglé en manuel. Le grain bain sera vidé au moyen d'une pompe vide cave.
Pompe destinée à relever un fluide de quelques mètres de hauteur ou à l'envoyer sour pression dans une conduite.
Terme employé en particulier en assainissement lors d'une récupératin en dessous du niveau du réseau
Une piscine constitue une dépendance bâtie dès qu'elle est fixée au sol à perpétuelle demeure et qu'elle n'est pas susceptible d'être déplacée.
Si des travaux de scellement et de terrassement sont effectués, l'installation d'une piscine (même en kit) peut entrainer une augmentation limitée de la taxe foncière
Il est à noter que l'augmentation est proportionnelle à la superficie de la piscine mais aussi à la surface des éléments bâtis qui l'entourent: terrasse, locaux techniques...
Oui. Selon le code général des Impôts Annexe 3 ART. 324-L II et 324-0, toute addition de construction entraîne une augmentation de la valeur locative taxable, même si elle ne concerne pas la partie principale du local.
La construction doit être fixée au sol à perpétuelle demeure de telle façon qu'il soit impossible de la déplacer sans la démolir.
Tel est le cas si la piscine, par exemple, repose sur des fondations ou une assise en maçonnerie ou en ciment.
Une piscine est définie selon le code général des impôts comme un élément de pur agrément classé parmi les dépendances bâties
Votre bâche est garantie 3 ans sous réserve d'une installation conforme à celle précisée dans la notice d'installation.
Sont exclues du cadre de la garantie les altérations consécutives aux conditions météorologiques suivantes : vents violents, chutes de neige et grêle violentes. En cas de chute de neige, il est conseillé de déneiger la couverture afin d'éviter un affaissement de celle-ci et une tension accumulée sur les sandows.
La garantie exclue également l'usure due à des margelles abrasives , décalages de niveaux et absence de joints
C'est une couverture de sécurité composée d'une bâche ( polyester enduit de PVC poids de 550gr/m2)
et de barres en aluminium anodisé porteuse sur la largeur reposant en leur extrémité sur les margelles et protégées par un patin.
- la tension et le verrouillage se fait par cliquets, enroulement par treuil et déroulement par sangle de rappel.
Pour les petits bassins une personne est nécessaire au déroulement et à l'enroulement. Au dela de 8 X 4 il est conseiller d'être 2 pour les manipulations.
Cette couverture répond à la norme de sécurité NF P90 308
Elle est garantie 3 ans à compter de la date d'achat.
Vérifier l'état des patins situés sous les tubes. En cas d'usure, leur changement doit être effectué ( préciser le type de patins).
L'entretien de la couverture à barres est à la charge du propriétaire.
Afin d'éviter une déformation ou torsion irréversible des tubes, il est conseillé de déneiger la couverture et de retirer les feuilles ou tout autre élément pouvant obstruer les trous d'écoulement des eaux (favorisant la formation des poches d'eau).
N'utiliser jamais d'alcool ou de solvant pour nettoyer la couverture mais uniquement de l'eau savonneuse et une éponge douce. Il est interdit d'utiliser des outils abrasifs et des nettoyeurs haute pression.
Le nettoyage de la couverture à barre ne doit pas se faire lorsque la couverture est installée sur la piscine.
Il est impératif de ne pas vidanger votre bassin. Maintenez le niveau d'eau au 2/3 supérieur du skimmer afin que la couverture conserve ses caractéristiques de sécurité (portance de l'eau).
Retirer seulement la pompe et laisser le groupe de filtration toujours sur le bassin.
Niveau d'eau requis pour la période d'hivernage : 2/3 supérieur du skimmer ( le niveau d'eau ne doit pas descendre en dessous de 150 mm maximum par rapport au sommet des margelles.
Nettoyage deux fois par an avec un nettoyeur à haute pression. Ne pas utiliser des produits abrasives sur les lames
Un constat de dysfonctionnement empêchant la fermeture et la sécurisation du bassin, ou tout élément détérioré devra être remplacé dans les plus brefs délais.
N'utiliser que des pièces agréées par le fournisseur / installateur. Les pièces de rechange doivent être d'origine et conformes aux spécifications de la norme
La bâche à bulles ou bâche d'été avec un enrouleur vous permet de conserver la nuit, les degrés acquis pendant la journée.
La bâche à bulle n'est pas conforme à la norme sécuritaire
Couverture composée d'une bâche (fibre tissée, stabilisé UV poids de 130 g/m²)
Conforme à la norme NF P90 308
Cette bâche est toutes saisons. Durant l'hiver, ne pas vidanger votre bassin votre bassin afin que la couverture conserve ses caractéristiques de sécurité ( portance de l'eau)
Niveau d'eau minimum : 1/3 supérieur du skimmer
niveau d'eau maximum 2/3 supérieur du skimmer
niveau d'eau requis pour la période d'hivernage : 2/3 supérieur du skimmer
2 personnes sont nécessaires à l'installation ou au retrait du filecopaque.
N'utiliser jamais d'alcool ou de solvant pour nettoyer la couverture mais uniquement de l'eau savonneuse et une éponge douce. Il est interdit d'utiliser des outils abrasifs et des nettoyeurs haute pression.
Le nettoyage de la couverture à barre ne doit pas se faire lorsque la couverture est installée sur la piscine.
A ce jour, aucun rideau flottant ne peut être posé sur une piscine ovoïde compte tenu de son élargissement en son milieu. la piscine ne serait plus protégée des pollutions extérieures et de plus, elle ne garderait plus son aspect sécuritaire.
Un modèle haut de gamme, de rideau coulissant sur la plage de la piscine existe. "Agora" de fabrication Hydra Système.
Il y a les margelles ""classic qui sont déclinées en plusieurs teintes, les margelles tradition (plusieurs teintes), les margelles Authentic (aspect bois) et les margelles Travertin (marbre)
L'aspect est recherché lors de la fabrication. L'ajout d'huile de démoulage permet une répartition du bullage superficiel.
Pour les margelles tradition, le moule est strié ce qui donne cet aspect typique et rustique.
Il est à noter que sur ce type de surface il ne faut pas courir.
Les matériaux constitutifs des plages et des margelles disposent des conditions de sécurité correspondantes aux législations en vigueur.
Les produits actuels du marché pour ajout sur les revêtements ne permettent pas de maintenir une bonne qualité esthétique du matériau.
C'est un phénomène naturel aléatoire sur les dalles et margelles de piscine.
C'est la migration du carbonate de chaux contenu dans le ciment qui remonte en surface par humidité et capillarité.
Cela ressemble à des coulures qui remontent en surface ou auréoles.
Ce phénomène disparait en général dans un temps assez long.
Il existe des produits qui peuvent atténuer ce phénomène (Techniseal).
Le taux de chlore idéal sur l'échelle colorimétrique se situe entre 1 et 1,5 ppm. Afin d'assurer un confort d'utilisation et une bonne action désinfectante.
Un excès de chlore peut entraîner un veillissement prématuré du liner et des équipements voir même irritation des yeux ou de peau.
Afin de diminuer le taux il faut arrêter tout apport nouveau de chlore et filtrer en continue pour permettre une évaporation plus rapide. Un complément d'eau neuve si possible permettra une dilution, sans toutefois rejeter une solution fortement chlorée à l'égoût.
Il est préconisé de mesurer une fois par semaine à l'aide de la trousse d'analyses les taux de ph et de chlore en effectuant des prélèvements de l'eau de votre bassin en se positionnant à l'opposé du groupe de filtration et en puisant à environ 40 cm en dessous du niveau de l'eau. il est plus favorable de procéder à ses prélèvements en fin de journée.
L'eau verte est due principalement à la présence d'algues.
Causes
Remèdes
Dérèglement du pH
Temps de filtration insuffisant
Hivernage trop long
Filtre mal nettoyé
Excès de stabilisant
Réglez votre pH avec une tendance acide
Brossez les murs et le fond de la piscine afin de
Manque de produit de traitement mettre les algues en suspension
Faites une chloration choc à 20 g/m3, et enfin, filtrez en continu en nettoyant vos filtres une à deux fois par jour, suivant les cas.
Les eaux très vertes
Les causes sont sensiblement les mêmes que pour une eau verte, sauf que dans ce cas la piscine a
probablement été abandonnée plus longtemps.
Ce qu'il faut faire :
• Réglez le pH avec une tendance acide.
• Brossez les murs et le fond de la piscine afin de mettre là aussi les algues en suspension.
• Faites simultanément une chloration choc 20 g/m3 et utilisez JD Flash 1 l. pour 10 m3.
• Filtrez en continu.
• Nettoyez votre filtre une à deux fois par jour.
Afin d'accélérer la reprise de votre piscine, nous vous conseillons de mettre en place la méga-poche
floculant, dans le panier du skimmer.
Pour les cas difficiles votre concessionnaire Desjoyaux, peut vous faire une analyse complet depuis le labo H2O test, il suffit d'apporter une echantillon de votre eau pris à un profondeur de 40cm.
La modification d'un matériel de sécurité normalisé, réalisée par un prestataire autre que le fabricant, exemptera la responsabilité de ce dernier sur l'intervention et, les conséquences éventuelles.
Un document spécifique stipule les dispositions du parrainage qui peut fonctionner sur tout le territoire Français. Le cadeau est remis par la concession qui bénéficie de la vente du fillieul.
Nettoyage au jet ou au nettoyeur haute pression si elle est trop incrustée de calacaire. Elle peut également bénéficier d'un bain dans une solution acide pendant plusieurs heures avant d'être rincée.
La couleur d'un liner est généralement imposée, en raison d'une installation proche d'une zone classée Batîment de France, d'une région littorale ou de la disposition d'une réglementation définie par l'urbanisme de la commune concernée.
Dans ce cas il y a obligation à l'utilisateur de respecter la demande de la mairie.
Couvertures de piscines souple permettant selon le type de conserver la chaleur ou d'assurer la protection du bassin. Certaines sont également des dispositif des sécurité normalisées
Dispositif conçu pour être implanté autour d'une piscine. Matérialisé, verticalement par un structure solide ou souple d'un hauteur minimum 1m10 il permet d'empêcher l'accès aux enfants de moins de 5 ans.
Jouet mobile et gonflable, aux formes arrondies flottante à la surface de l'eau. En aucun cas ce jouet ne peut être considéré comme une système de survie.
Système de balai automatique, le JD NET s'adapte à tous les groupes de filtration Desjoyaux (hors GRI 110). Sa finesse de filtration est de 200 microns
La nage à contre courant est produite par une pompe dite "bi-vitesse" (PBI) qui s'adapte sur tous les groupes de filtration Desjoyaux (hors GRI 110) elle se commande par l'intermédiaire d'un bouton pneumatique positionné sur la face du groupe de filtration.
Elle est destinée à toutes personnes désirant se faire masser le corps (avec ou sans lance de massage) et/ou toutes personnes désirant faire de la natation sportive "nage à contre courant"
Concept Desjoyaux breveté en 1978.
Assemblage de panneaux en polypropylène armés et coulé du béton.
Ce coffrage est de ce fait auto portant et imputrescible
Option indispensable pour protéger sa piscine de toute pollution extérieure mais aussi pour sécuriser sa piscine.
Il existe des couvertures non sécuritaires ( bâche à bulles) et des couvertures sécuitaires manuelle ( bâche à barres, bâche hiver) ou automatique (volets hors sol ou immergé)
Toutes piscines construites ou installées à partir du 1er janvier 2004 doivent êtres pourvues d'un dispositif de sécurité. Il existe 4 dispositifs normalisés. Les barrières, les alarmes, les couvertures et les abris. Piscine et sécurité
Le concept de filtration Desjoyaux permet une installation sur tous types de bassins. Les bassins à rénover sont équipés d'un liner armé pour assurer l'étanchéité du bassin.
Chauffage de piscine composé d'une résistance électrique intégrée dans une tubulure se positionnant sur le refoulement en sortie de pompe de filtration. Destiné aux montées en températures mesurées.
Média filtrant qui se place dans le bol réceptacle, permet la filtration et retient toutes les impuretés présente dans le circuit d'eau. Existe en 6, 15, ou 30 microns.
Balai hydraulique de fond, autonome, qui aspire et filtre les débris et impuretés, sans perturber la filtration. Il se branche sur l'aspiration au moyen d'une pièce désignée skim vac. Finesse de filtration : 200 microns
Fabrication et brevet Desjoyaux. Le groupe de filtration compact se positionne en cavalier sur la paroi de la piscine. Une partie filtre immergée et un local technique encastré dans la plage, cet ensemble limite les canalisations et évite de ce fait toute risque de fuite. Disponible en cavalier, intégré ou en escalier.
Easy One, Easy First ou Easy top, ces 3 modèles de couverture sécuritaire répondent à la norme NF P 90 308. Ils sont adaptés aux groupes de filtration Desjoyaux. L'enroulement de ces bâches se fait à l'aide d'une manivelle ou de la motorisation "Rolltrot"
Constitués d'éléments en polycarbonate sur traverses en aluminium, les abris téléscopiques Desjoyaux (bas, mi-haut et résidentiels) permettent de prolonger la saison de baignade est ainsi d'optimiser l'utilisation de sa piscine.
Il est nécessaire d'informer la compagnie couvrant les risques responsabilité civile et habitation, de la réalisation d'une piscine dans une proprièté. Cette démarche est réalisée par le propriétaire.
Fabriqué en polypropylène, il est injecté avec des matériaux composites, un procédé qui le rend imputrescible et facile à manipuler.
Livré à la forme et à la dimension de la piscine il permettra la réalisation des parois de cette dernière.
Destiné à recevoir le béton, élévé sur le radier de fond, il contribue à la résistance de votre piscine, notamment au gel ou aux mouvement de terrain.
Relevant d'une technique brevetée, il bénéficie d'une garantie de 10 ans sur la fabrication et dès lors que l'assistance technique sera contractée il bénéficiera d'une garantie de 10 ans sur l'installation.
Pour obtenir une desinfection efficace, il est nécessaire de maintenir une teneur en chlore libre à un niveau correct et le pH à une valeur adaptée.
Ainsi pour une piscine familiale il est utile de maintenir : 1 gramme de chlore actif par m3 et par jour. Pour ce faire les galets de chlore lent (200g) sont positionnés dans le skimmer à raison d'environ 1 unité en permanence en saison de baignade et ce selon le volume du bassin (150g pour 100m3 d'eau).
Le traitement de choc est une intervention ponctuelle, destinée à rompre avec la désinfection de routine. Les dosages utilisés sont d'environ 20g par m3 (pastilles ou poudre).
Le chore choc se dissoud très rapidement dans l'eau permettant une chloration choc lors de la présence d'algues. Utilisé à raison de 20g/m3, les pastilles, poudres ou autres granulés sont également fortement stabilisés contre les rayons UV ce qui peut contrarier l'efficacité du chlore si la teneur en stabilisant dépasse les 75ppm.
Ne pas pratiquer de traitement choc en milieu fermé (piscine intérieure couverte).
Le chlore lent se présente sous forme de galet de 200g, il permet de maintenir le taux de chlore libre de votre bassin à 1gr par m3 par jour. Les galets contenant de l'acide isocyanurique chaque ajout de chlore contribuera à augmenter le taux de stabilisant présent dans l'eau, ce qui pourra à terme contrarier l'efficacité du chlore.
Le chlore est un oxydant qui permet de désinfecter l'eau de votre piscine. Il Peut être ajouté dans le bassin sous plusieurs formes, liquide, solide, ou gazeux au au moyen de galets, pastilles, poudre, distributeurs ou pompe doseuses selon le choix et les utilisations de la piscine (familiales ou collectives).
C'est une couverture d'été, posée à même le plan d'eau, elle s'utilise la nuit et permet de limiter la perte de température de l'eau, l'évaporation et la pollution du bassin. Matériel non sécuritaire, il est conseillé de procéder à son enroulement au moyen d'un enrouleur positionné en bout de piscine.
Le Plan d'Occupation des Sols (POS) est un document d'urbanisme opposable aux tiers qui détermine l'affectation des sols selon l'usage principal qui doit en être fait, au regard de leur constructibilité (habitat, loisirs, activités, espaces naturels à protéger). La législation a aujourd'hui évoluée vers la création d'un nouveau document d'urbanisme, le Plan Local d’Urbanisme (P.L.U.), document qui sera progressivement appelé à remplacer le Plan d'Occupation des Sols.
Oui. Les abris commercialisés par Piscines Desjoyaux, répondent aux exigeances de la normes NFC 90 309, et sont ainsi considérés comme des dispositifs de sécurité normalisés. Pour autant il est ici rappellé, qu'aucun de ces matériels ne remplacent la vigilances des adultes, dans la surveillance des enfants à proximité d'une piscine ou d'un plan d'eau.
Elément constitutif d'un liner ou d'un abri servant à se positionner dans une pièce destinée à sa réception. Ex : profilé de liner permettant la fixation de ce dernier dans le profil d'accrochage.
Profilé de la structure cintrée d'un abri.
Trois parties constituent les abris : les structures aluminium, les remplissages et les façades. Les abris bas et mi-hauts sont livrés en 4, 5, 6 éléments assemblés. les abris résidentiels hauts sont livrés démontés, afin que les structures, les remplissages et les façades soient assemblés sur site.
Selon les différentes fabrications il existe plusieurs types d'abris. les abris fixes, les abris téléscopiques, les repliables souples, les bulles, et les vérandas. Par ailleurs, il est possible de distinguer les matériels hauts, les mi-hauts, et les bas. Piscines Desjoyaux commercialise les modèles bas et mi-haut benjamine, américa,et prestige ainsi que les modèles résidentiels hauts.
Il n'est pas conseillé de laisser déborder une piscine. En région à fortes précipitations il peut être positionné un trop plein, ou tout simplement procéder à la vidange régulière d'une partie de l'eau du bassin et ce au moyen du tuyau de balai positionné sur le refoulement et évacué vers un égout.
Un électroyseur est un appareil electrique asservi à la filtration, permettant à partir de l'eau salée de la piscine (3 à 4g/l), de produire une solution d'hypochlorite de sodium, (eau de javel) permettant la désinfection de la piscine.
« Nous n’héritons pas de la Terre de nos ancêtres, nous l’empruntons à nos enfants », Antoine de Saint-Exupéry (1900-1944)
Dans sa politique de développement durable, Piscines Desjoyaux a décidé de faire appel, pour l’impression de son catalogue piscine à une imprimerie label « IMPRIM’VERT » et a également décidé d’éditer son dépliant Portes Ouvertes du papier qui assure une bonne gestion : le papier certifié PEFC.
QUEL EST L’INTÉRÊT DES INDUSTRIELS À UTILISER DES MATIÈRES PLASTIQUES
RECYCLÉES ?
Réponse de Jean-Louis DESJOYAUX PDG du Groupe Piscines Desjoyaux (La Fouillouse 42)
Le salon mondial du spa et de la piscine privée du 18 au 21 novembre 2008 à Eurexpo Lyon
Piscines Desjoyaux sera au rendez-vous du mondial professionnel de la piscine et du spa, du 18 au 21 novembre 2008 : « Pour apporter des réponses de professionnels aux professionnels ».
Piscines Desjoyaux vous propose son nouveau catalogue : un éventail d’équipements innovants et porteurs de notre philosophie pour transformer la piscine et ses abords en un véritable espace de vie…Nous vous invitons à découvrir notre gamme complète d’abris, de couvertures, de robots nettoyeurs, de chauffages…chez votre concessionnaire le plus proche et à demander dès à présent le catalogue équipements Desjoyaux.
Du 12 au 22 septembre, c’est le moment de plonger pour l’investissement de votre prochain été !
Les étés ne sont plus ce qu’ils étaient ? Pourtant vous le savez bien, les étés se suivent et ne se ressemblent pas…
Et pour être prêt pour votre prochaine saison baignade, le compte à rebours commence maintenant !
The JD Spas range offers you the health benefits of a spa bath in your own home, backed by the extensive experience and warranty cover of the Desjoyaux Group.
Desjoyaux above-ground pools are keenly-priced, practical and attractive, and their easy accessibility, fast installation and the many forms of pleasure they offer are sure to appeal.
Whatever make of pool you own, why not optimise your comfort by installing Desjoyaux equipment? We have devised an extensive range of ingenious solutions to help you personalise and protect your pool and enjoy the pleasure it offers for longer.
All-in-one filtration solutions that combine stairs, a spotlight, a filtration unit and bubble jets
Tonic Roman filtering staircase
This stair unit is inserted between two structure panels during assembly. This module provides filtration, stairs and a spotlight, and can be equipped with a blower and cross-current swimming accessory to leave you relaxed and feeling great
Most customers choose to equip these wide, surface-mounted Roman stairs with the cross-current swimming and bubble jet options that everybody loves. Double membrane filtration makes it particularly suitable for larger pools.
The Quiberon pool, measuring 3.50 x 2.20 m, is specially designed for the smaller pool area. Despite its compact size, the Quiberon's optional bubble jet and cross-current swimming accessories make it suitable for fitness swimming, massages and hydrotherapy.
As simple, practical, and easy to install and maintain as ever, the Desjoyaux filtration system now includes a full range of units to suit different requirements and preferences.
Surface-mounted filtration unit
Surface-mounted filtration is a tried-and-trusted solution that combines efficiency and accessibility
Benefits:
The filtering part is submerged
The filtration compartment is set into the pool deck
The raised filtration system straddles the pool wall
Dissociable from the structure
Easy user maintenance
Replaceable in the future with a more technologically-advanced model
Integrated filtration, a typical Desjoyaux blend of innovation, attractive design and performance.
Benefits:
Set into the pool wall
Flush with the coping boards and pool deck
Indissociable from the structure
Cover available in a range of colours to match the pool deck
Quick, easy maintenance
Appropriate design
The "all-in-on" filtration solution: stairs, spotlight, bubble jets, and hydrotherapy
Benefits:
Beyond its technical advantages, the Jet Set offers the best in total comfort with a host of features, including counter-current swimming, bubble jet and hydrotherapy options built directly into the pool structure.
Looking for rapid installation, anti-leak reliability, effective filtration and water savings? You've guessed it – Desjoyaux's patented filtration concept has all the answers!
Inspired by outboard boat engines, the exclusive Desjoyaux system has a completely pipeless design. This eliminates the need for long and costly buried pipe-laying work and reduces the risk of leaks. When installed, the unit can straddle the pool wall, be built into the structure, or be incorporated into stairs (depending on the options available). Desjoyaux's filtration unit concept features a submerged filtration compartment that also houses the spotlight, and a technical compartment, built into the pool deck.
Filtration is carried out via a skimmer. The water then passes through a filter with a screening size 6 to 30 microns, before being re-released into the pool through the discharge nozzles. This circulation system means that the entire volume of water in the pool can be filtered and also be treated with disinfecting products located in a prefilter. As a result, no waste water is drained off, making the filtration process more environmentally friendly, and the pool water is still crystal clear and free from leaves, insects and other particles. The ingenuity of Desjoyaux's filtration concept also makes it an ideal solution for the renovation of any swimming pool. It is also available with a number of different comfort options, such as water heating, a blower, counter-current swimming, etc.
The Desjoyaux filtration system harnesses the gyratory flow principle, generating savings in two areas:
By eliminating the need for back-wash maintenance operations, the system saves water and avoids discharging treated water to the sewer. This approach economises an estimated 200 litres of water per operation, compared with sand-based filtration.
The circulating pump consumes less electricity, due to the absence of pipes that would normally cause pressure head losses in the water circuit.
Benefits of Desjoyaux pipeless filtration
The pipeless filtration unit provides:
Faster filtration and outstanding water quality; the water is renewed in only two hours, compared with an average of six hours with a conventional system.
Very fine filtration (6 to 30 microns, compared with 8 microns for bottled mineral water), thanks to Desjoyaux's patented filtering bag.
Additional benefits:
Reduced risk of leaks
Quick to install
Proven effectiveness
Easy maintenance
Simple winterisation procedure
Decreased head losses
Built-in spotlight
Low-maintenance design
Easy servicing
Corrosion-proof material
High filtration power
Fits all types of new and renovated pool
Filtering bag:
Patented by Desjoyaux
Vacuum-based models for the Desjoyaux filtration range;
6-,15- or 30-micron filter media
Benefits:
Easy to use and clean (either using a hose or by washing at 30°C in a washing machine).
The reinforced covering is composed of 2 supple membranes that are heat-coated onto a woven polyester backing. The pool is made watertight on site as the covering is welded to fit the shape and dimensions of the pool. The woven polyester backing provides added strength and resistance. This type of covering is particularly recommended for frequently used pools (such as public pools), or pools with an irregular shape or dimensions that do not allow a prefabricated liner to be made.
This technique can also be used for renovation projects..
The liner is composed of PVC panels that are assembled in the factory to the exact shape and dimensions of your pool. It is then delivered to the pool site, ready to be installed and fixed to the pool structure using the liner lock, that is welded in place when the liner is manufactured.
While in the mould, the liner is dyed a solid colour and is treated for UV resistance. It is also covered by a 10-year degressive guarantee.
The liner is available in 7 different colours:
White, Light Blue, Royal Blue, Caribbean Green, Sand, Marble or Mosaic.
How can rapid construction be combined with enduring reliability and the freedom to create any shape of pool you like? The Desjoyaux casing structure concept, known as the Active Permanent Casing, solves this conundrum. The shape and size of your pool are determined by assembling a series of panels that form the structure's "active permanent casing" … This exclusive process ensures that the pool is strong and long-lasting, while offering great creative freedom in terms of its design; the installation technique maximizes the pool's service life by casting a reinforced concrete bed-slab and by installing the reinforcement and casting the side-walls in a single operation. Your Desjoyaux pool is a rot-proof, self-supporting, monobloc structure.
Our casing panels are manufactured using recycled polypropylene mixed with carbonate. In the final stage of recycling these materials, the panels are then buried to form a durable structure. Turning waste into a source of bathing pleasure is a dream come true with Desjoyaux pools.
Your pool comes with a 10-year warranty covering the product and installation work.
Benefits of the Desjoyaux casing structure
The polypropylene active permanent casing provides:
All the benefits of a reinforced concrete structure (safety, warranty cover, etc.) but none of the drawbacks (formwork and form stripping, and the need for internal and external coatings).
Our active casing features a series of posts, solving the expansion-related problems inherent to concrete designs.
The bed-slab and side-walls are cast in a single operation to form a monolithic structure, eliminating the risk of separation that would be unavoidable with a two-stage casting process.
An unlimited choice of shapes and sizes.
80% of the technical challenges are resolved at the factory, resulting in record-breaking construction times.
Additional benefits:
Industrially mature, patented exclusive technique
Exceptionally resistant to frost and ground movements
Rot-proof casing
Self-supporting structure
10 year warranty
The structure is delivered to the site according to the requested pool size and shape.
Manufacturing and installation processes certified by Bureau Veritas
La loi française impose à tout propriétaire de piscines de sécuriser l’accès du bassin aux enfants de moins de 5 ans. Respectez-la.
La loi du 3 janvier 2003 relative à la sécurité des piscines, renforcée par son décret d’application du 31 décembre 2003 impose en FRANCE et dans les DOM TOM que toute piscine de plein air enterrée ou semi enterrée soit pourvue d’un dispositif de sécurité normalisé (alarme, barrière, abri ou couverture). Cette loi s’applique à toutes les piscines existantes quel que soit leur usage ou leur année de construction. En application des articles L128-1 et suivants et R128-1 et suivants du Code de la Construction, les maîtres d’ouvrages des piscines construites ou installées à partir du 1er janvier 2004 doivent les avoir pourvues d'un dispositif de sécurité destiné à prévenir les noyades, au plus tard à la mise en eau, ou, si les travaux de mise en place des dispositifs nécessitent une mise en eau préalable, au plus tard à l'achèvement des travaux de la piscine.
Même équipée des meilleurs systèmes de sécurité, la surveillance de vos enfants ne dépend que de vous. Les chiffres le prouvent : Le risque est maximum lorsque les enfants ont moins de 5 ans. L’accident n’arrive pas qu’aux autres… Surveillez et agissez en respectant ces quelques conseils :
• NE LAISSEZ JAMAIS UN ENFANT ACCEDER SEUL PRES
D’UN POINT D’EAU QUEL QU’IL SOIT
• NE QUITTEZ JAMAIS VOTRE ENFANT DES YEUX
• Désignez un seul responsable de la sécurité
• Renforcez la surveillance lorsqu’il y a plusieurs utilisateurs dans la piscine
• Apprenez à nager à vos enfants dès que possible
• Mouillez nuque, bras et jambes avant d’entrer dans l’eau
• Apprenez les gestes qui sauvent et surtout ceux spécifiques aux enfants
• Interdire le plongeon ou les sauts en présence de jeunes enfants
• Interdire la course et les jeux vifs aux abords de la piscine
• N’autorisez pas l’accès à la piscine sans gilet ou brassière pour un enfant ne sachant pas bien nager et non accompagné dans l’eau
• Ne laissez pas de jouets à proximité ou dans le bassin s’il n’est pas surveillé
• Maintenez en permanence une eau limpide et saine
• Stocker les produits de traitement d’eau hors de la portée des enfants
A prévoir :
• Téléphone accessible près du bassin pour ne pas laisser vos enfants sans surveillance quand vous téléphonez
• Bouée et perche à proximité du bassin
En cas d’accident :
• Sortez l’enfant de l’eau le plus rapidement possible
• Appelez immédiatement du secours et suivez les conseils qui vous seront donnés
• Remplacez les habits mouillés par des couvertures chaudes
• Mémorisez et afficher près de la piscine les numéros de premiers secours
Desjoyaux vous propose trois types d’équipement pour répondre à la législation, les alarmes, les abris et les couvertures.
LES ALARMES
Les alarmes Desjoyaux ont fait l’objet d’études et de contrôles rigoureux lors de leur fabrication et sont conformes à la norme NF P90 307. Accessibles, simples à poser, elles offrent une solution sécurité discrète et attractive.
Les abris Desjoyaux ont fait l’objet d’études et de contrôles rigoureux lors de leur fabrication et sont conformes à la norme NF P90 309. En plus de constituer un équipement de sécurité des plus efficaces, ils vous permettent de profiter de votre piscine chaque jour de l’année !
Les couvertures Desjoyaux ont fait l’objet d’études et de contrôles rigoureux lors de leur fabrication et sont conformes à la norme NF P90 308. Elles vous permettent de sécuriser votre piscine tout en protégeant l’eau des feuilles mortes et des intempéries.
This accessory assists your filtration unit, connecting directly to its discharge pipe and using the filtering bag. It can be installed in just a few minutes and is suitable for flat-bottom and gently-sloping pools. It is also recommended for above-ground pools. Connects directly to the skimmer. Operates without electricity, using the water suction created by the pool's filtration system. Supplied with 10 m of pipe and a pressure regulator to ensure a constant flow rate.
Pick-up
This clever two-wheeled storage unit keeps all your accessories and maintenance products tidy and ready for use.
JD Epuisette 08
Specially designed for collecting leaves and foreign objects from the bottom of the pool. Very robust frame with profiled edge. Includes a very tough net.
JD Brosse de paroi
This extra-wide wall brush has very tough bristles to remove dirt effectively. The raised, rounded ends allow easy access to corners
JD Manche Balai Télescopique
This broom handle has an extra-rigid design for improved handling and sweeping accuracy, and features an innovative catch release system that allows one-handed length adjustment.
JD Brosse de groupe
This brush reaches into even the most inaccessible corners, inside, behind and underneath the filtration unit. Fits Desjoyaux broom handles.
JD Filt’ Net
This clever device uses a water jet to clean the filtering bag. The bag holder is stablilised by its base, which should be filled with sand or water.
JD Epuisette
The L-shaped design of the scoop guides any leaves and foreign bodies floating on the surface toward the bottom of the net. A lip lifts and collects any foreign objects lying on the pool floor.
JD Tête balai
This next-generation product features return springs and control valves for enhanced pool floor adhesion, and the bristles are specially located to channel any impurities. Features include a triangular design to allow easy access to corners, as well as a hose kink prevention system.
H2O test
This easy-to-use water analyser kit contains fast-dissolving tablets to make the process as simple as possible.
The safety, visual appeal and total comfort offered by a Desjoyaux pool shelter are just a few of the many benefits. Your covered pool will take your bathing comfort to a new level, with the water always at the ideal temperature and with more consistent water quality.
The cover harnesses the greenhouse effect to raise your pool temperature by up to 10°C, thereby extending the bathing season by 3 to 4 months and letting you soak up every last ray of sunshine.
A Desjoyaux residential shelter is an extra room for your home, letting you enjoy your pool to the full all year round. Come rain, wind or snow, nothing will be able to stop you diving in after a hard day at work!
We have developed three solutions for fitting a heating system to your Desjoyaux filtration unit: the heat pump, the electrical heater and the heat exchanger. Heating is the nec plus ultra in terms of pool comfort, allowing you to enjoy your pool to the full from the very first rays of spring sunshine right through to the very end of the season.
Simple, pratique, économique, facile à poser et à entretenir, le système de filtration Desjoyaux se décline désormais en une gamme sachant couvrir toutes les envies…
La filtration en cavalier
La filtration en cavalier, la valeur sûre sachant combiner efficacité et accessibilité
Desjoyaux vous propose de véritables collections aux teintes et aux matières coordonnées. Selon votre style, choisissez l'ambiance qui saura exprimer au mieux votre personnalité
Lorem ipsum dolor sit amet consectetuer Suspendisse faucibus lobortis Nam massa. Vestibulum ligula at dictumst condimentum ipsum egestas semper Vestibulum dolor interdum. Risus turpis at at natoque platea et turpis amet ligula felis. Tempus lacinia ut nulla augue lorem dui fames id velit vel. Velit adipiscing facilisi tellus sit orci ut semper purus egestas Vivamus. Sed.
Desjoyaux vous propose de véritables collections aux teintes et aux matières coordonnées. Selon votre style, choisissez l'ambiance qui saura exprimer au mieux votre personnalité
Desjoyaux offers complete collections with coordinated colours and materials. So whatever your personal style may be, you can be sure to create a setting that perfectly reflects your individuality.
JD Pool Net simply connects to the filtration unit's discharge line, without affecting the pool filtration system and without clogging up the unit's filtering bag. JD Pool Net operates without a booster pump, unlike many similar robots that connect to the discharge line.
JD Pool Net is a simple robot that has been meticulously designed and manufactured.
Specifications
Supplied with an extra wide filtering bag, six 1.80 m long tube sections, 5 swivel connectors, 7 floats to balance the robot and 1 nozzle sleeve for connecting to the filtration system.
This robot connects to the filtration unit discharge line with all Desjoyaux pumps except the P11
Benefits
Flow control valve
Does not disrupt filtration when used
Operates with no need for a booster pump
Warranty
One year from date of purchase, for normal conditions of use
Recommendations for use
For best results, we recommend keeping the filtering bag clean and closing the side discharge nozzle (on straddle-mounted filtration systems).
Do not use your robot if you are carrying out an express chlorination session in your pool.
Do not coil the pipes. Store them straight.
This self-propelled robot operates independently of the pool filtration system. It is powered by a 12 V motor connected to the electric power unit at all times by a flexible cable. It even cleans the pool walls and steps as well as the water line, using its foam or plastic caterpillar tracks.
Specifications
Standalone unit that connects to the 230V AC power supply upstream of the transformer
Operating system: 2 motors
2 cleaning cycles: 1h 30 min. and 3h
Filtration: 20 microns (option: 100 micron bag)
Cable length: 18 m floating
Pump flow rate: 16 m3/h
For pools up to 12 x 6 m
Benefits
JD Clean features a powerful microprocessor that protects the motors and optimises the cleaning process according to the chosen cycle:
• Pool deck system: if the robot moves out of the pool onto the pool deck, its direction of travel is automatically reversed so that it returns to the water.
• Dry running safety cutout: the motors are stopped if the robot operates out of the water for more than 20 seconds.
Warranty
Two years from date of purchase, for normal conditions of use
Recommendations for use
Clean the filtering bag whenever you remove the JD Clean from your pool. Check that the pool's pH and chlorine content are correct, i.e. between 7.0 and 7.2 for the pH and between 2 and 3 ppm for the chlorine
To begin a new cleaning cycle, simply switch off the power supply unit, wait 30 seconds and then press "ON" to restart it.
The honeycomb structure of the Desjoyaux bubble cover provides daytime heat gains of 4 to 6°C (depending on the pool's size and exposure to the sun), and prevents the heat thus accumulated from dissipating overnight. If the pool is equipped with a heating system, having a cover reduces running costs. Last but not least, this cover fits almost all existing and future pools...
Specifications
"Sealed Air" cellular polyethylene fabric
400 microns thick
UV-resistant
Blue
Custom dimensions. Available in rectangular formats only. Protective flaps can be added for pools with stairs
Benefits
Excellent water heating and heat retention performance.
Cover reinforced for extra strength.
Warranty
Two years, provided the cover is used as described in the installation instructions.
Recommendations for use
The bubble cover is designed to be laid on the surface of the pool with the smooth side facing up. Use of a cover reel to handle the cover is recommended.
When not in use, the bubble cover should be protected against sunlight by fitting its protective cover (with the aluminium side up) with the aid of shock cords. If you do not have a cover reel, pleat the cover and store in the shade under the protective cover.
Do not use the cover on the pool for 40 hours following shock chlorination treatments. Rinse thoroughly and leave to dry before winterising. Never swim under the cover – Never walk on the cover.
The JD Roller cover reel :
The JD Roller bubble cover reel is available in two versions:
Aluminium shaft fitted as standard with a brake and a handle for rolling and unrolling the cover.
Mobile yet stable, UV-resistant white polypropylene base. This exclusive model is designed and manufactured by Desjoyaux.
Ideal for covering your pool out of the swimming season, whether or not you choose to winterise it.
A winter cover prevents photosynthesis, thereby preventing the development of algaea and other micro-organisms and facilitating pool maintenance and refilling.
he Aqua 1500 is stronger than the Filecopaque cover, and in addition to its outstanding insulating properties, is fitted with straps that prevent any risk of the cover being lifted off by gusts of wind; the tension applied to the Aqua 1500 cover also prevents rainwater pockets from forming.
The handling and fastening principles used for these products make them unsuitable for use as summer/winter covers.
Filecopaque specifications
130 g/sq m woven fibre cover
UV-stabilised
Attaches to "socket pegs" set into the ground
Straps sewn onto the cover accommodate the "Sandowclick" catches
Sandowclick" strap and catch fastening system/li>
Available on request: Extension for pools with stairs
Aqua 1500 specifications
PVC-coated woven polyester
Weight: 550 g/sq m
Treated to protect against ultraviolet radiation, frost damage, saline fog and chlorine.
Anchored by engaging the "Sandowclick" catches with "socket pegs" set into the ground
Double eyes on the cover accommodate the "Sandowclick" catches
Available on request: Extension for pools with stairs
Warranty
Three years, provided the cover is installed as described in the installation instructions.
(The warranty does not cover damage caused by strong winds, heavy snowfall and hailstorms).
Recommendations for use
Winterisation
It is very important not to drain your pool, to avoid compromising the cover's safety properties (which are dependent on the load-bearing capacity of the water). Simply remove the pump, leaving the filtration unit in place on the pool. Maintenance
Clean the cover using soapy water and a soft sponge. Never use alcohol or solvents. Never use abrasive tools or a pressure washer.
The bar cover is suitable for use all year round, in all weather conditions.
The cover's thermal properties help the pool gain and retain heat; its opaque design minimises photosynthesis and the growth of algae and other micro-organisms all year round.
The bars connect to a cover reel for easy movement, and this system can be automated with the Rolltrott option.
Specifications
PVC-coated polyester cover, treated to protect against ultraviolet radiation, frost damage, saline fog and chlorine
Anodised aluminium supporting bars
The bar ends rest on the coping boards, which are protected by skids
Stainless steel ratchet tensioning and locking
The cover is rolled up using a winch and unrolled by tensioning straps
Available on request: Rolltrot motorised rolling/unrolling system
Benefits
The same cover can be used all year round
Quick and easy to install, even during the swimming season
Warranty
Three years, provided the cover is installed as described in the installation instructions.
Recommendations for use
Winterisation
Winterisation
It is very important not to drain your pool. Keep the water level up to the top two-thirds of the skimmer, to avoid compromising the cover's safety properties (which are dependent on the load-bearing capacity of the water). Simply remove the pump, leaving the filtration unit in place on the pool.
Water level required during the winter period: top two-thirds of the skimmer (the water level should not be allowed to descend below 150 mm from the top of the coping boards).
Maintenance
To prevent any risk of tubes becoming irreversibly bent or twisted, we recommend clearing the cover of snow, fallen leaves and any other objects that might block its drain holes (which could cause water pockets to form).
Clean the cover using soapy water and a soft sponge. Never use alcohol or solvents. Never use abrasive tools or a pressure washer.
Do not clean the bar cover while it is installed over the pool.
Use only replacement parts approved by the supplier/installer. Use only genuine replacement parts that comply with the specifications in the applicable standard.
Automatic cover reel: Roll Trot
The optional Roll Trot accessory motorises the cover's movements, allowing it to be deployed effortlessly. It is suitable for use with all Desjoyaux bar covers.
Specifications
Powered by a 12 V battery included in the module
Weight: 5.3 kg
Benefits
Recharges from the mains power supply once a week (approx. 10 rolling movements)
Estimated cover rolling time (for a 10 x 5 m pool without stairs): 3 min
Warranty
One year, subject to compliance with the instructions for use, care, maintenance and winterisation.
Recommendations for use
Care and maintenance
If you do not intend to use the Rolltrot for an extended period, store it in a cool place, and recharge the battery every six months using the dedicated charger.
Store the Rolltrot in a dry place, out of the reach of children and away from products that contain chlorine.
All the benefits of a motorised cover at a mouthwatering price. This system helps you enjoy your pool to the full, covering and uncovering it on demand, with no fuss or effort.
It has the same protection and heat accumulation and retention qualities as a standard cover, and is attractive and easy to use too. This cover (available in straight-line shapes only) can be fitted to most new and existing pools with only minor work.
Specifications
Rolling shutter-type automatic pool cover with rigid floating slats.
75 x 15 mm UV- and stain-protected PVC slats
Weight: 5 kg/sq m
Motorised 180 mm diameter anodised aluminium shaft
Pool dimensions: Width 3.5 m to 6 m x length 6 m to 13 m
Cover deployment is motorised, either with or without a limit switch
Benefits
The same cover can be used all year round
Fits most pools, including existing pools
Warranty
Three years for the complete operating mechanism and the solar or white PVC slats. With coloured slats, the warranty does not cover alterations in colour over time.
This warranty is valid for normal conditions of use.
Recommendations for use
Maintenance
Apart from cleaning, no routine maintenance is required for the slat cover. However, an annual inspection by the installer is necessary, to check that the system operates correctly and is undamaged.
The shelter's base and wall in-fill panels are made of anti-UV treated 4 mm SAN or PMMA.
The roof is made of 6 mm thick anti-UV treated polycarbonate.
Benefits
Protect your pool from leaves and external contamination all year round.
The shelter facilitates winterisation operations and simplifies pool start-up and in-season maintenance.
The shelter harnesses the green-house effect to increase the temperature by up to 10°C compared to an open-air pool, depending on the time of year.
The fully-telescopic Desjoyaux low-line shelter lets you take make the most of your pool in season.
Warranty
PParts, labour and travel costs are covered under the following conditions: Infill panels: 5 years, of which the last 3 decreasing by thirds
Wearing parts and accessories: 2 years,
Aluminium frame and lacquering: 5 years.
Models
“Benjamine”, for pools up to 7 x 3.50 m. This model consists of 4 or optionally 5 elements
“America”, for pools up to 8 x 4 m. This model consists of 4 or optionally 5 elements
“Prestige”, for pools up to 10 x 5 m. This model consists of 5 or optionally 6 elements
Recommendations for use
Winterisation
There is no real need to winterise the pool. Care and maintenance
At least twice a year, open out your shelter in order to clean it completely, and check that all fittings are properly tightened and that all safety parts work properly.
Clean the aluminium frame: use special products suitable for enamel paint.
Clean the in-fill panels (polycarbonate, SAN or PMMA):
Clean carefully using a soft cloth and soapy water or a special window wiper, taking care not to press too hard against the surfaces.
Desjoyaux submerged covers combine comfort and discretion, making them the ideal choice for pool owners with a discerning eye.
Desjoyaux submerged covers provide effective protection against accidents, and can be deployed or retracted in seconds, as often as you like.
Furthermore, they retain some or all of the heat accumulated during the day, and the optional "solar heating slats" can even provide a temperature boost of up to 6°C. Last but not least, these covers also reduce consumption of pool care products by protecting your pool efficiently and eliminating the photosynthesis that encourages the growth of algae and other micro-organisms.
Specifications
Rolling shutter-type automatic pool cover with rigid floating slats.
75 x 15 mm UV- and stain-protected PVC slats
Weight: 5 kg/sq m
White PVC or wood duckboard
In-line shaft motorisation.
Motorised 180 mm diameter anodised aluminium shaft
Pool dimensions: Width 3.5 m to 6 m x length 6 m to 13 m
Cover deployment is motorised, either with or without a limit switch
Benefits
A easy access to device of detection.
Dividing wall separate from the mechanical system.
Release control mechanism (motor cut-out).
All models are motorised for effortless operation
Warranty
Three years for the complete operating mechanism and the solar or white PVC slats. With coloured slats, the warranty does not cover alterations in colour over time.
This warranty is valid for normal conditions of use.
Recommendations for use
Maintenance
Apart from cleaning, no routine maintenance is required for the slat cover. However, an annual inspection by the installer is necessary, to check that the system operates correctly and is undamaged.
The infill panels for the top of the shelter are made of 6mm thick cellular polycarbonate
4 mm SAN or PMMA panels for the shelter's base and walls
Corrosion-resistant stainless steel fastenings
Anchoring system: Plastometal screws fasten into stainless steel "chemical" plugs
Suitable for 5- or 6-element pools measuring up to 10 X 5 m
Benefits
All-weather bathing - Create an area protected from bad weather and enjoy your pool for longer
A proven construction technique for maximum reliability and simplicity
Fully enclosed for maximum safety (complies with NF standard P90 309)
Warranty
Parts, labour and travel costs are covered under the following conditions:
In-fill and wearing parts: 5 years, of which the last 3 decreasing by thirds,
Aluminium frame and lacquering: 5 years
Models
"America" mid-high shelter. Suitable for pools up to 8 x 4 m (5 elements)
"Prestige" mid-high shelter. Suitable for pools up to 10 x 5 m (6 elements)
Recommendations for use
Winterisation
There is no real need to winterise the pool. Care and maintenance
Always replace any damaged components or assemblies promptly.
The cross-current swimming kit fits all the filtration systems in the range (except the P11). Water exits the discharge nozzle at double the usual rate and air is incorporated into the water stream, making it ideal for water massage and for relaxing your back. The cross-current swimming feature can be used with the massage lance to produce a draining action.
As its name suggests, the counter-current swimming kit lets you swim on the spot. This solution is much more effective and practical than being forced to choose an oversized pool because you enjoy athletic swimming
This feature is very easy to switch on and off by pressing a button on the pneumatic control unit, which is accessible from the pool.
Your initial investment is quickly recouped in the form of minimal running costs.
Installing a JD Pac heat pump ensures your comfort and wellbeing using technology that is not only reliable and economical but also preserves the environment, as 80% of the energy transferred to the pool is obtained from solar energy contained in the air. When used in conjunction with a heat-retaining bubble cover, a heat pump can double the length of your bathing season.
What is more, the system is simplicity itself to use - all you have to do is set your pump to 28°C!
This system is suitable for both new-build and existing pools.
Specifications
A titanium heat exchanger is used to recover energy from the outside air and transfer it to the water in the pool.
The JD Pac 40, JD Pac 60 and JD Pac 80 ranges (sized for different pool volumes) are installed on a filtration by-pass loop, between 3 and 10 m from the pool.
The heat exchanger must be supplied with water via polyethylene pipes with a diameter of at least 50 mm.
Benefits
Economical and effective
80% of the energy used to heat your pool is free. Reliable
The JD Pac is equipped with a PSA patented titanium condenser for totally corrosion-proof operation. Extremely quiet operation
JD PAC 40: 38.4 dBa at 10 m. Environmentally friendly
80% of the energy used to heat your pool comes from the air. Easy to use
Simply set your heat pump to 28°C and then lie back and enjoy...
Warranty
Two years, provided the system is installed and commissioned by a professional fitter (Except workforce of the electric details).
Additionally, all titanium parts in contact with water are covered by a lifetime corrosion warranty.
Models
JD PAC 40 / JD PAC 60 / JD PAC 80
Recommendations for use
Operation
Simplicity itself - All you have to do is set your pump to 28°C! Installation
The heat pump is easy to install for either a new-build or existing pool, requiring only straightforware electrical and hydraulic connections.
The heat pump must be installed outdoors.
The JD Pac air/water unit operates at outdoor air temperatures of +5°C and above.
Do you only use your pool occasionally? Is your pool at your second home? Then the electric heater offers the perfect solution for heating your pool.
It is the cheapest product in terms of initial purchase and installation, although it is also the most expensive to run.
Specifications
The electric heater comprises a polyamide tube and an electrical resistance heater. Water is heated as it passes through the tube, where it comes into contact with the heating elements. System components:
• Titanium heating elements
• Polyamide body
• Patented U-shaped design with room for 2 elements to be installed (can be used alone or together). This means you can adapt the power output of your heater to meet the specific requirements of your pool.
• Digital temperature control unit
• Flow valve
• Safety thermostat
Benefits
Recognised reliability :
In a world exclusive, PSA has combined polyamide and titanium to produce a totally corrosion-proof solution Installation:
By a swimming-pool professional in the technical compartment of your filtration unit. Easy to use:
Simply set your electric heater to 28°C – then lie back and enjoy... Initial heating time: 2 to 5 days. During initial heating, set filtration to continuous mode. When the desired temperature has been reached, set it to automatic.
Warranty
Two years, provided the system is installed and commissioned by a professional fitter.
Additionally, all TITANIUM parts in contact with water are covered by a lifetime corrosion warranty.
Use
Simplicity itself - all you have to do is set your heater to 28°C! Installation
The electric heater is easy to install for both existing pools and pools under construction; it requires only straightforward electrical and hydraulic connections in the pump compartment of the filtration unit.
Electrolysis works by adding a small amount of salt to the water in the pool (4 g/litre). After the water is filtered, it is then treated by electrolysis, which converts the salt into a powerful sterilising agent, killing off all algae and bacteria and oxidising any organic residues. In spite of the combined effects of swimmers and sunshine, the salt remains in the water and allows the disinfecting process to be constantly renewed. The JD Sel Sea 60 is designed for pools with a capacity of up to 60 m3, while the JD Sel Sea 100 is suitable for pools up to 100 m3.
Specifications
A timer can be used to set the chlorine production time (as a percentage) for each pool, independently of the filtration system. The "Standby" function takes over from chlorine production, temporarily suspending electrolysis without shutting down the filtration system.
Automatic cover function: The JD Sel Sea automatically reduces the amount of chlorine produced when the pool is covered.
The electrode consists of a series of seven titanium plates coated with precious metal oxides.
These electrodes can be self-cleaned by reversing the polarity. The duration of the cleaning process is programmable, allowing it to be adapted for the hardness (TH) of the water in your area.
An easily-run self-test lets you check the electrolyser's main functions in only a few seconds.
Benefits
Easy and cheap to maintain
Consistent water quality and unrivalled comfort - no more unpleasant smells and red, sore eyes!
A highly-automated design for ease of operation and low maintenance.
Warranty
3 years
Recommendations
Operation/Care
To keep the pool in good condition, the water must have a pH between 7 and 7.2.
Maintenance is kept to the strict minimum - just add salt once per season.
An easily-run self-test lets you check the electrolyser's main functions in only a few seconds.
These electrodes can be self-cleaned by reversing the polarity. The duration of the cleaning process is programmable, allowing it to be adapted for the hardness (TH) of the water in your area.
This shower – essential for ensuring the hygiene of your pool water – is a source of natural well-being thanks to its built-in solar panel, which heats the water. It is fitted with an adjustable shower head and combines environmental friendliness and comfort with elegance and intelligent design.
Specifications
Water capacity: 20 litres
Solar panel
Mixer
Benefits
Harness the power of the sun to heat the water in the tank with no other energy source. The shower cuts pool contamination by external dirt by almost 40%. This not only maintains the quality of the water, but also generates savings in terms of filtration and disinfection
Warranty
1 year
Recommendations
Install a water supply point near your pool. We also strongly recommend having a tank, inclined plane or drainage grating to collect and remove waste water (to prevent it from stagnating and attracting insects).
Do you already use a boiler to heat your home?
If your boiler uses mains gas, this is the solution for you... A heat exchanger connected to a mains gas boiler provides a perfect solution for quickly heating your pool while keeping consumption within reasonable limits.
This is an intermediate solution in terms of costs, with consumption varying according to your domestic heating energy
Specifications
Water flows in opposite directions through two circuits inside the heat exchanger:
• Primary circuit: Carries the water from a solar, geothermal or gas-fired heating system that is to supply heat to the pool
• Secondary circuit: Carries the water from the pool that will be heated in the exchanger
System components:
• Titanium pipes
• Polyamide body
• Digital temperature control unit
• Flow valve
• Circulator pump
• Check valve
Benefits
Recognised reliability:
In a world exclusive, PSA has combined polyamide and titanium to produce a totally corrosion-proof solution Fast heating:
When supplied from a boiler, the pool can be heated to 28°C within 24-48 hours. This product is ideal if the pool is to be used intermittently (e.g. at weekends). The right solution:
In terms of investment cost and consumption if you have mains gas-fired central heating.
Warranty
Two years, provided the system is installed and commissioned by a professional fitter.
Additionally, all titanium parts in contact with water are covered by a lifetime corrosion warranty.
Additionally, all titanium parts in contact with water are covered by a lifetime corrosion warranty.
Heat Line 20+ / Heat Line 40+ / Heat Line 70+
Recommendations for use
Operation:
These products harness your domestic boiler to heat indoor or outdoor swimming pools. The heat exchanger is an ideal solution if you want to heat your pool quickly, as it can be warmed to a temperature of 28°C in 24-48 hours.
Example: A 10 x 5 m (75 m3) outdoor pool with an insulating bubble cover or automatic pool cover can be heated from 18°C to 28°C using a boiler and a 40 kW heat exchanger in 27 hours. This level of performance makes the heat exchanger solution ideal if the pool is to be used intermittently (e.g. at weekends).
Heat exchangers are also compatible with low-temperature circuits, as used in geothermal heating systems and domestic heat pumps.
Made of PVC from 75/100 to 150/100, this supple covering ensures the pool remains watertight. Its thickness and its product name will vary according to the end use and installation technique. The 75/100 thick polymer is more commonly known as the liner, and is used for private pools with standard shapes and dimensions. The 100 to 150/100 thick reinforced covering is the preferred choice for public swimming pools, renovations or free-form pools.
Caribbean blue, Atlantic shades or Seychelles style? As tastes and colours should not have to be compromised, Desjoyaux offers a wide range of liner colours to guarantee that you find the perfect shade.
The reinforced liner, laid on site, means greater originality and possibilities limited only by your imagination: decorative blocks, bar stools, submerged pool decks, incorporated patterns and logos…
As a complement to your pool, a staircase is essential for ensuring easy user access. And, depending on the model, it can also offer the perfect place to relax and lounge. The model can be chosen as soon as your pool has been sited.
The Desjoyaux Group has been listed on the Second Marché compartment of the Paris stock exchange since 1992. This status reassures customers of the company's leadership and provides transparent proof of its growth performance. Although certain competitors have tried to follow in its footsteps, the Desjoyaux Group remains the first swimming-pool manufacturer to be listed on the Paris stock exchange. (The stock-exchange information of the Group Desjoyaux Pools)
All over the world, swimming pool is pronounced "Desjoyaux"! Over the years, the Desjoyaux concept has successfully overcome technical and geographical boundaries. The brand is now present on every continent, thanks to Desjoyaux's ability to innovate, the quality of its products and the range of services it offers. Today, more than 5,000 people around the world are proud to be part of the Desjoyaux team.
Quality design and manufacture are the Desjoyaux hallmarks
A pool is for life… When you choose a Desjoyaux Group pool, you choose the strength of the industry leader! The various components of your Desjoyaux pool are designed and manufactured in our 37,000 sq. m plant in near Saint-Etienne in the Rhônes-Alpes region of France. They benefit from the latest technological advances – in particular, a revolutionary ecological production line that transforms recyclable plastics, and a set of injection presses ranging from 500 to 6,000 tonnes that is unique in Europe.
It should also be noted that the Desjoyaux Group invests €14 million each year in new product research and development.
Le principe de fonctionnement par giration du système de filtration Desjoyaux permet une double économie :
Une économie d’eau en ne nécessitant aucune opération de back wash pour l’entretien, donc pas de rejet à l’égout d’eau traitée. On peut estimer une économie de 200 litres par opération par rapport à une filtration à sable.
Une consommation maîtrisée de la pompe par l’absence de canalisations qui entraînent des pertes de charges liées au circuit de l’eau.
The story begins in 1966. Jean Desjoyaux, keen to share a certain idea of wellbeing with his children, relatives and friends, built the family's first swimming pool by hand. The Desjoyaux Group - now the world's leading in ground swimming pool manufacturer, supplying over 14,000 pools* on all five continents each year - has always stayed true to this ideal of sharing. Indeed, what could be more satisfying than bringing pleasure to people's lives and hearing laughter ring out from backyard that flash blue in the sunshine? And the secret of this success? Desjoyaux pioneered two different exclusive concepts (namely, the monobloc structure and the pipeless filtration system) and successfully applied the craftsman's production values on an industrial scale, opening up endless possibilities in terms of shapes, options and equipment...
Furniture, bath towels, inflatable accessories... Nothing but the best for your poolside activities. Your Desjoyaux boutique also stocks an extensive selection of toys and accessories designed so that you can make the most of your aquatic adventures – a whole range of 100% Desjoyaux products.
Certain water treatment products and accessories are essential in order to keep your pool in tip-top condition.
You Desjoyaux dealer carries a wide range of tried and tested maintenance products, with solutions to suit your particular pool and lifestyle. Your dealer is there to advise you on the best choice of accessories and robots.
We understand that pool owners want maximum bathing enjoyment with minimum fuss.
Therefore, Desjoyaux created a comprehensive range of seven Premium Services covering all the key aspects of pool care, specially designed to make your life easier.
These Premium Services are all available from your dealer. Ask about them today...
Premium Service 1: THE START-UP SERVICE PACK
The first treatment of the season is the most complicated, but is essential in order to ensure that you enjoy crystal-clear blue water all summer long!
The Start-up Service Pack includes:
• Uncovering
• Pool cleaning
• pH adjustment
• Chlorine shock treatment
• Disinfection
Premium Service 2: THE WINTERISATION SERVICE PACK
Bear in mind that the standard of winterisation affects the subsquent start-up procedure and hence the success of your next bathing season.
The Winterisation Service Pack includes:
• Chlorine shock treatment
• Treatment with winterisation products
• Frost-proofing of the filtration system and salt treatment equipment (where applicable).
• Installation of floats and the winter cover
Premium Service 3: THE COMPLETE SERVICE PACK
This pack provides a comprehensive service that covers both the start-up and winterisation procedures! Your pool also receives a routine technical inspection twice a year, giving you total peace of mind!
Premium Service 4: DIAGNOSTIC ANALYSIS
The appropriate treatment for your pool and the corresponding treatment frequency will vary according to your use of the pool and the quality of the water in your area.
Your dealer will analyse your water and recommend an appropriate treatment based on the analysis results.
Premium Service 5: FREEDOM POOL CARE SERVICE
Going on holiday? Is your pool at your second home?
It is important not to leave the water in your pool unsupervised for too lengthy a period.
With the Freedom Pool Care Service, your pool is inspected regularly and the following services are performed:
• Clean the water line
• Clean the pool with the pool net
• Clean the pool with the vacuum brush
• Adjust the water level
• Add care products as necessary
Premium Service 6: HOME DELIVERY
Take the easy option! We can deliver your pool care products directly to your home
Enjoy the peace of mind that comes from knowing you will never run out of pool care products.
Your Desjoyaux dealer will be happy to inform you whether this service is available in your area.
Premium Service 7: HEAT ANALYSIS
Wondering how to gain a few degrees to extend your swimming season? Desjoyaux supplies heat pumps, electric heaters and heat exchangers, and your local dealer will be happy to advise you on the right solution for your situation.
The heat analysis includes all the relevant factors, including installation and running costs, to help you make an informed decision.
The innovative Click'it concept is amazingly inexpensive to buy and run, making the pleasure of a home pool truly affordable without compromising on the build quality that has made Desjoyaux's reputation. Discover the range's Ellipse model, available in self-assembly and ready-to-swim versions.
Whatever the brand or origin of your pool, Desjoyaux has a suitable renovation solution.
The Desjoyaux filtration system can be installed in any pool – a real advantage. Once the old filtration system has been removed, a reinforced covering is applied to ensure that the pool does not leak. When the filtration system has been started, your renovated pool will be in as-new condition.
Desjoyaux above-ground pools are keenly-priced, practical and attractive, and their easy accessibility, fast installation and the many forms of pleasure they offer are sure to appeal. You don't need a big garden to enjoy the Desjoyaux lifestyle...
When you choose a Desjoyaux above-ground pool, you get the pipeless filtration technology on which the company's success has been built.
The pine frame and coping boards are treated in an autoclave that is alternately vacuum-pumped and pressurised, allowing protective products to penetrate deep into the core of the wood. The treatment products used to protect against insects and humidity comply with current European standards and are environmentally friendly.
Specifications
Autoclaved pine
Desjoyaux filtration
Effective water volume: 12.5 m3 or 20.5 m3
Total weight: 850 kg or 1300 kg
Floor area: 11.7 sq m or 20 sq m
Double ladder: wooden exterior and stainless steel interior with steps Desjoyaux GRI 110 filtration unit
Kit contents
Pine frame and coping, stainless steel ladder, fastenings, installation guide, 1 light blue liner, 1 ground mat, 1 liner lock strip, 1 filtration unit with electrical programming unit with a 30 mA residual current devices, 1 halogen spotlight (71 W) and 1 power cable (20 m).
Filtration specifications: flow rate: 11 m³/hour; pump power: 510 Watt (0.7 hp); pump rotation speed: 2,720 rpm
Benefits
75/100ths liner
Desjoyaux filtration unit with 11 m3/h pump and built-in spotlight
Technical compartment safety device
Supplied with 20 m power cable and a 30 mA residual current device to protect people from electric shock risks.
Warranty
The frame is covered by a 10 year manufacturer's warranty
The liner is covered by a phased 10 year warranty
Two year warranty on the filtration unit, filtration control uniy and pump
2 models
JD Hors Sol Octagonal with an internal diameter of 3.90 m; 1.17 m high beneath the coping boards
JD Hors Sol Octagonal with an internal diameter of 4.780 m; 1.17 m high beneath the coping boards
Installation advice
The kit is supplied complete with detailed assembly instructions to guide you through the installation process Electrical installation
Electrical cables should be passed through a red corrugated conduit, which in turn should be buried in a trench at least 50 cm deep, and 85 cm deep if it crosses a path or road.
Different underground cable conduits must be kept at least 20 cm apart.
Electrical installations must comply with French installation standard NF C 15100, 2002 edition. All electrical installation work must be carried out by an approved electrician.
Desjoyaux has selected a wide range of pool maintenance products, including both chlorine-based and chlorine-free treatments. Your dealer will be able to recommend the most suitable treatment for the way your pool is used: second home, main home, availability, number of swimmers, and the pool's dimensions are elements that will influence your selection. Allow professionals to assist you in your choice. *Important note: Store pool maintenance products in a cool, dark place, out of the reach of children. Always follow the handling and storage instructions on the label.
The JD Spas range offers you the health benefits of a spa bath in your own home, backed by the extensive experience and warranty cover of the Desjoyaux Group.
Relax, unwind and enjoy a massage... Water washes away all the stress and fatigue of everyday life… Take the plunge and judge for yourself…
Specifications
Self-supporting multi-layer reinforced acrylic body
Metal frame
Thermal insulation
5 hp massage pump
Corona-discharge ozone generator, coupled with a settling tank and activated charcoal filter
Benefits
Variety of possible massages
Constant filtration and disinfection: JD Zone
The water in the spa is regenerated up to 144 times per day
Turbocharged blower
"Easy Plumbing" maintenance solution
Warranty
Phased five-year cover for the body (mechanical performance and cracking) and piping (leaktightness and bonding).
Two years on the pumps, blower, heating system, control panel and electronics card, subject to the product being installed in accordance with the manufacturer's instructions and the electrical connections being made by a qualified electrician.
Removable parts, insulating covers, filters, skimmers, seals, bulbs, LEDs, headrests, trim parts and all other wearing parts are not covered by the warranty
Have the electrical wiring work done by a qualified electrician. To allow easy movement around the spa, we recommend allowing an additional area of at least 50cm all around the spa.
Use
To help you enjoy your spa to the full, Nova Spa has developed a line of specific, easy-to-use chemical products.
Exclusive feature on the JD Zone: Constant filtration and disinfection
All models in the JD Spa range are equipped with the exclusive JD Zone constant filtration and disinfection system. This innovative concept ensures crystal-clear water and eliminates all maintenance worries. The system consists of a CD (corona-discharge) ozone generator, coupled with a settling tank and an activated charcoal filter to eliminate harmful waste gases. The water in the spa is regenerated up to 144 times per day.
Environmental considerations have become a very important feature in our everyday lives, and we are encoureged to recycle materials and choose less polluting cars, energy-saving electrical appliances and green building materials… Thanks to Desjoyaux's exclusive concept and corporate ethos, this green approach can also be applied to swimming pools.
The Desjoyaux Group has been pursuing a sustainable development and resource conservation policy for many years; the company uses 100% recycled materials in its pool structures. Furthermore, all new products and all aspects of our manufacturing process are consistent with our sustainable development-based environmental strategy.
Desjoyaux - the eco-logical choice
A Desjoyaux pool makes your home a more pleasant place to live while at the same time helping to preserve the natural environment. When leisure and lazing go hand in hand with green living, everybody wins, and so does our planet!
Structural panels
Our casing panels are manufactured using recycled composite materials mixed with carbonate. In the final stage of recycling these materials, the panels are then buried to form a durable structure. Turning waste into a source of bathing pleasure is a dream come true with Desjoyaux pools
Filtration system
By eliminating the need for back-wash maintenance operations, the system saves water and avoids discharging treated water to the sewer. This approach economises an estimated 200 litres of water per operation, compared with sand-based filtration. The circulating pump consumes less electricity, due to the absence of pipes that would normally cause pressure head losses in the water circuit.
Desjoyaux invented the living pool and is committed to making the pleasure of a home pool affordable to all, by applying craftsman's values on an industrial scale and innovating with exclusive, future-proof technology. From the outset, the Desjoyaux group has consistently brought innovative, and sometimes revolutionary, ideas to the in ground swimming pool market. This strategy has paid off and the company is now the world's number one!
Safety legislation notwithstanding, swimming pools can be a source of risks for children, and for the under-fives in particular. You must fit your pool with some special equipment and follow a few golden rules. Whatever safety equipment is fitted, remember that there is no substitute for constant adult supervision.
Legal requirements
Under French law, all pool owners are required to prevent unsupervised access to the pool by children under the age of five. Respect it.
The Act of 3 January, 2003 pertaining to swimming pool safety, consolidated by the implementing order of 31 December 2003, requires that in France and in French overseas departments and territories, all sunken or semi-sunken outdoor swimming pools be fitted with a safety system (i.e. an alarm, barrier, shelter or cover) that complies with applicable standards. This Act applies to all existing pools, irrespective of their use or year of construction. In application of Articles L128-1 and subsequent articles, and R128-1 and subsequent articles of the Construction Code, owners of pools built or installed after 1 January 2004 are required to have had them fitted with a system intended to prevent drowning accidents no later than when the pool is filled, or, if the work to install such accident prevention systems requires the pool to be filled in advance, no later than the date of completion of work for the pool.
Even if your pool is fitted with the best safety systems, you are responsible for supervising your children. The figures speak for themselves - Children under five years of age are at the greatest risk. Accidents don't just happen to other people... Keep a close watch and heed the following recommendations:
• NEVER ALLOW A CHILD TO APPROACH A POOL OR OTHER WATERHOLE UNACCOMPANIED
• KEEP YOUR CHILD IN SIGHT AT ALL TIMES
• Appoint one individual to be responsible for safety
• Be especially vigilant when there are several people in the pool.
• Teach your children to swim from an early age.
• Wet your neck, legs and arms before entering the water
• Learn basic lifesaving techniques, especially those that apply specifically to children
• Do not allow diving or jumping when young children are present
• Do not allow running or horseplay near the pool
• Ensure that children who cannot swim are not allowed to enter the pool unaccompanied without a lifejacket or armbands
• Do not leave toys in or near an unattended pool
• Make sure the pool water is clean and clear at all times
• Keep water treatment products out of the reach of children
Sensible precautions:
• Have a telephone near the pool, so that you can telephone without leaving your children unsupervised
• Keep a lifebelt and pole near the pool
In the event of an accident:
• Remove the child from the pool as quickly as possible
• Call the emergency services immediately and follow their instructions
• Replace wet clothes with warm blankets
• Commit the emergency telephone number(s) to memory and display near the pool
A swimming pool is all about pleasure and comfort! That's why Desjoyaux has come up with all the options you need to ensure that your pool reflects your tastes to a tee. Looking for a pool that reflects your personality? Look no further...
The panels are installed by masons using traditional techniques. These panels are then reinforced with concrete which is poured on site in a single operation, thus linking the pool slabbing and walls in order to create a free-standing, single-unit structure.
Once the concrete has been poured, a smooth screed is created on the pool's reinforced concrete bed-slab. The pool is then ready to be fitted with a liner. This is fixed in place using a liner lock that covers the base and walls of the pool and is attached to the top of the casing. The sturdiness and safety of the entire active permanent casing production process is tested and monitored by Bureau Veritas. Moreover, the manufacture and installation of your Desjoyaux pool structure is guaranteed for 10 years.
Pour eviter l'agression des UV sur le chlore il est nécessaire d'y additionner du stabilisant (l'acide cyanurique).
Chaque galet de chlore stabilisé contient un pourcentage de stabilisant qui reste dans le bassin s'il n'est pas evacué par vidange. Au délà de 75ppm (parts par million) en piscine collective et 120-150ppm en piscine privée on dit que l'eau est surstabilisé. L'efficacité du chlore est ainsi diminuée.